The elumo Hub should be installed as close to the elumo Reader as possible on the secure side of the door. Choose the installation method that is most suitable for your environment:
Placed above a false ceiling
Surface-mounted on the wall (cables enter via side entry)
For in-wall wiring (where cables enter via rear entry) please got to elumo Hub Installation (in-wall wiring).
Placed above a false ceiling
Place the hub securely in a suitable location above the ceiling
Remove the side cable knock-out
Route the cables into the elumo Hub
Connect the elumo reader and ethernet cables
Connect the wired electric lock to the relay
Hook the case lid on the top of the hub and secure underneath using the supplied security screws
Surface-mounted on the wall (cables via side entry)
Use the mounting template provided to identify a suitable place on the wall to mount the hub, ensuring that the template is upright & level, and mark the mounting locations using the holes provided
Drill the mounting holes using a 6mm or 1/4" diameter drill bit
Place the supplied fixings in the mounting holes
Mount the hub to the wall using the supplied screws
Remove the side cable knock-out
Route the cables into the elumo Hub
Connect the elumo reader and ethernet cables
Connect the wired electric lock to the relay
Hook the case lid on top of the hub and secure underneath using the supplied security screws